dual 450 cfm TBI for 383 ci SBC

[Allan Langford]

would some "dum" (ie non dwell) bosch coil ignitor modules do the same? and
would this also work for low imp injectors?

Regards,
    Allan Langford

----- Original Message -----
From: Bruce Plecan <nacelp at bright.net>
To: <gmecm at diy-efi.org>
Sent: Tuesday, January 30, 2001 3:53 AM
Subject: Re: dual 450 cfm TBI for 383 ci SBC


>
> Stay tuned,
> I got a new box here to try with some Honkin Power Mosfets in it.  Done
> externally would be a min parts deal, just a good heatsink needed.   This
is
> not intended as a daily driver deal, just a kludge to get the job done,
and
> for off road purposes......
> It should last with 6 TBI style injectors.
> Just need some TBI injectors to risk.
> My first, *bad deal* has left me with a TBI injector shortage.
> If some one has 6 or so junk TBI injectors that they don't need (but
> function electrically), that would help.  They and the box will run till
> failure so they will be probably totally trashed....
> Bruce
>
> > -> Other than building a driver box to control the 4 injectors, what
> > -> kinks can people forsee?
>
> >  Can't you just use the output from the 747 to trigger a couple of
> > Honkin' Big Transistors(tm)?  Or do you need to add extra stuff?
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org