anyone try this

[Pat Ford]

I'll do it for $200 8*), I'll try to dig up the article rsn

Gary Heuston wrote:
> 
> I inquired to Circuit Cellar about having that article posted on their website
> so that it could be viewed and their official response was "go to hell".
> actually it was more like "you can't put our copyrighted material on your sight
> (I never asked to do so) but we will put it on our site and you can link to it
> for $250.
> 
> so does anyone have a copy of the magazine they would be willing to scan for
> less than $250?
> 
> Gary
> gary.heuston at afwa.af.mil
> 
> "Cosby, Melvin C. (GEL, MSX)" wrote:
> 
> >         Hi everyone, this is my first post.  I really enjoy reading this
> > list.
> > The October 2000 issue of Circuit Cellar describes this OBD II protocol
> > converter.  It is from ISO to RS232.  The magazine article talks mostly
> > about the ISO protocol.  The hardware design is in the magazine and the
> > microcontroller and PC software can be downloaded from the web site you
> > mentioned.  Look at the bottom of the page for a link titled "Circuit Cellar
> > Readers...".  It is ISO 9141-2 only.
> >         Since the article was published the Ford and GM protocols have
> > appeared as options on the web site.  If you built the converter from the
> > article I don't know if he would sell just software for the other protocols.
> > It wouldn't hurt to ask.
> >
> > Later,
> > Mel
> >
> > PS The Circuit Cellar article is what got me searching on the web for EFI
> > material.  That is how I came to subscribe to this list.
> >
> > -----Original Message-----
> > From: toddburkard at pcmc.com [mailto:toddburkard at pcmc.com]
> > Sent: Friday, July 06, 2001 4:44 PM
> > To: gmecm at diy-efi.org
> > Subject: anyone try this
> >
> > Has anyone tried this Scan tool for the OBD II?
> >
> > http://www.ghg.net/dharrison/obdscan.html
> >
> > Or has anyone built a cable and found some software that works with it for
> > the OBD II GM's?
> >
> > Thanks,
> > Todd
> >
> > ----------------------------------------------------------------------------
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> > ----------------------------------------------------------------------------
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: pat.vcf
Type: text/x-vcard
Size: 108 bytes
Desc: Card for Pat Ford
URL: <http://lists.diy-efi.org/pipermail/gmecm/attachments/20010709/0e58ea30/attachment.vcf>