'749 in Fiero

[Programmer]

I'd better clarify a few things--I was the chip writer, info hander,
etc...the customer
did his own wiring and such. I'm on the 4th chip with him now. As far as I
know, he's
using a lot of the parts from a 2.0L Sunbird--but I'll nail him on exactly
what he did. Yes,
it's dissy equipped.

Lyndon.
----- Original Message -----
From: <ECMnut at aol.com>
To: <gmecm at diy-efi.org>
Sent: Thursday, July 12, 2001 9:05 PM
Subject: Re: '749 in Fiero


> Nice work Lyndon!
>  I just got a 749 out of a 88 turbo GrandAm.
> Just itching to follow in your footstep with a boosted 4 banger.
> Are you running a distributor? (sorry if it's a repeat question).
> If you say "coil pak", my questions are just getting started.. <grin>
> Mike V
>
> In a message dated 7/12/01 10:06:42 AM Eastern Daylight Time,
> nwester at eidnet.org writes:
>
> > Guys--just wanted to report that a '749 project in a turbo'd Fiero is
> >  working good. We've got boost limited to 10 psi, idle is still a bit
weird,
> >  but otherwise it's using the basic syty bin with the injector constant
> >  changed. Manual trans with 2.8 V6...
> >  Apparently ran a 14.89 yesterday at the track with no further tweaks.
> >  I'll have a full report of all mods later...
> >
> >  Lyndon.
> >
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org