port injection for 4.3L V6 ?

[Len Sabatine]

    A good dual plane intake , larger TBI , mild upgrade hyd roller cam
    and an optimized [ for changes] OE Chip will run real strong, for less
    time and expense of changing to port injection system.
    The stock 4.3 TBI Intake leaves much to be desired by way of efficient
    mixture handling and velocity. With the right combination, a 4.3 TBI combo
    will fly.
    Len

>Hi everyone,
>
>I have a '90 Chevy S10 with the 4.3L V6 and TBI.
>It is bone stock.  After a stock rebuild, it is running well again.
>I believe I understand the TBI system fairly well and
>would like to upgrade the induction to port injection.
>I am looking at street use only, with the occasional tow.
>Would like to improve low RPM torque if possible.
>Does this type of retrofit even make sense?
>Are there any factory port injected 4.3 (or other) systems
>that could be retrofitted?
>Any other recommendations from the list members?
>I am open to all options at this point.
>
>Thanks in advance,
>Mel
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org