FW: Speedometer

[Gonyou, Jeremy (.)]

A testimonial on the previously mentioned VSS box...


		* 	*	*	*	*	*	*	*


Jeremy-

I can't post to the list from work, so I'm sending to you directly.  You
may want to post this if you find it useful.

I recently swapped a T-56 transmission with 40Kpulse/mile VSS into my old
'82 Camaro and used the Dakota box to get VSS input to the '165 ECM.
Really great box.

It provides 5 outputs of varying translation.  I feed mine the 40K input,
and take 2K output from the box to my ECM.  One of the remaining 4 outputs
is 4K, and the other three I haven't investigated yet.

The connections at the box are screw-clamp type, no crimping or soldering
required.  You can also find the instruction manual on their website for
more detail.

-Kevin

On Thu, 19 Jul 2001, Gonyou, Jeremy (.) wrote:

> 
> 
> A buddy of mine was having some speedo problems and didn't want to mess with a DRAC.  He found this on the net, looks like a pretty cool solution.
> 
> 
> http://www.dakotadigital.com/products/interface.htm
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org