Fwd: Back from brazil and pistons

[romans, mark]

So, what pin was it?  What code are you running?
I have a friend who runs 89 auto code in his 88 Firebird
that he put a 6 speed in.  350 tpi. His idle hangs until
he comes to a stop and waits.
Any ideas?
Thanks.
Mark
----- Original Message -----
From: "Kevin Crain" <kevin at warpten.com>
To: <gmecm at diy-efi.org>
Sent: Saturday, June 16, 2001 9:24 AM
Subject: Re: Fwd: Back from brazil and pistons


> At 08:50 AM 6/16/01 -0600, you wrote:
> >Are you giving the PCM a clutch switch signal ?
> >It may stall on you with the vette 6 speed bin...
> >
>
> Hmmm.  No, I'm not sending a clutch switch signal.  There are two switches
> on the '95 Firebird pedal set...one that closes when the clutch pedal is
> out and another that closes when the pedal's in.  Guess it's time to haul
> out the Helms and see which pin(s) the '165 ECM wants to see which signal
on.
>
> No stalling issue, no SES light, and the idle returns to 750 much more
> quickly now when stopping.
>
> -Kevin
>
> -Kevin
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org