730 / 8D cold spark

[rr]

It is right after the spark latency table. Only the
header is there. The actual table is not in the hac.

BobR.

;----------------------------------------
; COOLANT SA CORR vs LD / 2 AND COOL
;
;----------------------------------------

L8137: FCB 57 ; SA BIAS FOR BASE COOL S.A. TABLE

; 20 DEG (for next table)

**************************
INCLUDE F2A.SRC
;-------------------------
; COOL SA TBL, 12 BLKS; $8138 - $81A7
;
; TBL = (VAL + L8137) * (256/90)
**************************

----------------------------------------------------------

On Tue, 19 Jun 2001 02:55:25 -0400
 Bob Valentine <bob at tecmark.com> wrote:
> I've been looking thru the anht_hac for a while trying to
> find where the
> cold spark timing settings are.   I see the hot restart
> retard settings at
> $L802F-$L8032, but where are the acutal settings for cold
> SA?
> 
> I've tweaked the "coolant SA vs LV/2 and coolant" table
> with no results.  
> 
> Startup over ~115 deg is fine, below that is always
> harder/longer than it
> should be, very often requires two trys.  Drivibilty
> below ~115 is
> sluggish, can feel when the "normal" timing kicks in like
> a switch at that
> temp.  
> 
> -> Bob Valentine
> -> bob at tecmark.com
> 
> 
> 
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org