GM ignition trigger

[Squash]

Nothing like excitation.  Thanks.

Squash

--- Len Sabatine <sabatine at epix.net> wrote:
>      Square edges are OK. Xducer needs _ some dwell time excitation.
>      Len
> 
> >I rigged up a GM pickup coil (magnetic crank-trigger type) and it fires an 
> >HEI 7-pin module with a
> >2-plug tower DIS coil from a V6 GM car.  Anyways, the coil fires just when 
> >the pickup passes over
> >iron.  So I need to mount a small piece of iron/steel on the flywheel of 
> >my 2-cylinder.  Is this
> >something that should be possibly a triangle shape with the point passing 
> >the pickup, similar to
> >the pickup coil in a stock HEI?  Or is a square edge fine?
> >
> >Thanks,
> >Squash
> >
> >=====
> >Trains, Trucks, and EFI at http://www.trailrunners4x4.org/users/realsquash
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Get personalized email addresses from Yahoo! Mail
> >http://personal.mail.yahoo.com/
> >----------------------------------------------------------------------------
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 


=====
Trains, Trucks, and EFI at http://www.trailrunners4x4.org/users/realsquash

__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org