Code 32 on 165

[Programmer]

Hi--just got back. Buried my nephew yesterday--not a good day...

Lyndon.
----- Original Message -----
From: Marteney, Steven J. <smarteney at xlvision.com>
To: <gmecm at diy-efi.org>
Sent: Thursday, June 21, 2001 6:52 AM
Subject: RE: Code 32 on 165


> That would be interesting to look at.  Fax to 561-581-7313, to my
attention.
> There is definitely a temp sensor in the base of the EGR valve.  Do you
> think it may still look at the integrator to verify???
>
> Thanks!  Steve
>
> -----Original Message-----
> From: Programmer [mailto:nwester at eidnet.org]
> Sent: Wednesday, June 20, 2001 6:20 PM
> To: gmecm at diy-efi.org
> Subject: Re: Code 32 on 165
>
>
> Here's a couple tidbits...depending on how it interprets EGR flow--there's
> either the temp
> sensor on the EGR valve, as mentioned, or it looks at or for an integrator
> value change
> at cruise. If you've got a fax number, Steve--I can send you the GM code
32
> chart...
>
> Lyndon.
> ----- Original Message -----
> From: Marteney, Steven J. <smarteney at xlvision.com>
> To: <gmecm at diy-efi.org>
> Sent: Wednesday, June 20, 2001 2:03 PM
> Subject: Code 32 on 165
>
>
> > Anyone have any insight into Code 32's on a 165?  I started setting Code
> 32
> > again last week, coincidentally after going to a 195deg stat from a 180
> > hi-flo.  It mainly sets in the morning after about 10 minutes of 75-80
> > highway speeds.  It set one time in the evening after work same
> conditions.
> > The EGR valve and temp diag switch are new within 2 years (and vacuum
> > lines).  The vac solenoid is new within a year.  That's what solved this
> > problem before.  Any connection bewteen the higher engine temps and this
> > thing suddenly setting code 32?  BTW, it didn't set it this morning.
> First
> > time I drove it on the highway in 5 days.
> >
> > Steve
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org