Was Delphi--now Crossfired

[Bruce]

Not that I recall.
I **think** that was all done in the dash, with just a injector tap to the
ecm.   Been along time on that one.
Bruce

From: "Programmer" <nwester at eidnet.org>
Subject: Was Delphi--now Crossfired
> You wouldn't be out of numbers...thanks again, Bruce !!
> Is there anything in the archives about the '84 vette "instant
> fuel averaging" when you change to the '7747 computer ?
> Lyndon.

> From: Bruce nacelp at bright.net
> Subject: Re: Delphi connectors
> > 12146448 is for .80-1.0 mm2 cable
> > 12146447 is for .35-.5   mm2 cable
> > I'm about out of numbers <g>
> > Bruce
> >   Not really.......

> > From: "Programmer" nwester at eidnet.org
> > Subject: Re: Delphi connectors
> > > Would you happen to have the pin numbers ? For some reason my GM
dealer
> > > says the pin numbers don't exist--and that's the archive numbers
<G>...
> > > Lyndon.

> > > From: Bruce nacelp at bright.net
> > > Subject: Re: Delphi connectors
> > > > Try a 12110113 for the dark red, and 12110115 for the dark blue.
> > > > We'll leave out check the archives.....<g>..
> > > > Bruce
> > > >    GN is running N I feel froggy..

> > > > From: "Programmer" <nwester at eidnet.org>
> > > > Subject: Re: Delphi connectors
> > > > > Red and blue--both 32 pin.
> > > > > Lyndon.

> > > > > From: Bruce nacelp at bright.net
> > > > > Subject: Re: Delphi connectors
> > > > > > What color are the receptacles, and how many pins?.
> > > > > > Are they the same as a 8625?
> > > > > > Bruce
> > > > > > From: "Programmer" nwester at eidnet.org
> > > > > > Subject: Delphi connectors
> > > > > > > I've tried 13 times now to down load this Delphi*pdf catalogue
> > that
> > > > > > > usually hickups right around 13megs and gets unreadable.
Anyone
> > > > > > > got the ECM connector numbers for a 16197427 so I can get my
> > > > > > > S10 project finished ??
> > > > > > > Lyndon.


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org