Was Delphi--now Crossfired

[Programmer]

Injector tap to the ecm ?? Isn't the injector signal already there ?

Lyndon.
----- Original Message -----
From: Bruce <nacelp at bright.net>
To: <gmecm at diy-efi.org>
Sent: Wednesday, June 27, 2001 5:44 PM
Subject: Re: Was Delphi--now Crossfired


>
> Not that I recall.
> I **think** that was all done in the dash, with just a injector tap to the
> ecm.   Been along time on that one.
> Bruce
>
> From: "Programmer" <nwester at eidnet.org>
> Subject: Was Delphi--now Crossfired
> > You wouldn't be out of numbers...thanks again, Bruce !!
> > Is there anything in the archives about the '84 vette "instant
> > fuel averaging" when you change to the '7747 computer ?
> > Lyndon.
>
> > From: Bruce nacelp at bright.net
> > Subject: Re: Delphi connectors
> > > 12146448 is for .80-1.0 mm2 cable
> > > 12146447 is for .35-.5   mm2 cable
> > > I'm about out of numbers <g>
> > > Bruce
> > >   Not really.......
>
> > > From: "Programmer" nwester at eidnet.org
> > > Subject: Re: Delphi connectors
> > > > Would you happen to have the pin numbers ? For some reason my GM
> dealer
> > > > says the pin numbers don't exist--and that's the archive numbers
> <G>...
> > > > Lyndon.
>
> > > > From: Bruce nacelp at bright.net
> > > > Subject: Re: Delphi connectors
> > > > > Try a 12110113 for the dark red, and 12110115 for the dark blue.
> > > > > We'll leave out check the archives.....<g>..
> > > > > Bruce
> > > > >    GN is running N I feel froggy..
>
> > > > > From: "Programmer" <nwester at eidnet.org>
> > > > > Subject: Re: Delphi connectors
> > > > > > Red and blue--both 32 pin.
> > > > > > Lyndon.
>
> > > > > > From: Bruce nacelp at bright.net
> > > > > > Subject: Re: Delphi connectors
> > > > > > > What color are the receptacles, and how many pins?.
> > > > > > > Are they the same as a 8625?
> > > > > > > Bruce
> > > > > > > From: "Programmer" nwester at eidnet.org
> > > > > > > Subject: Delphi connectors
> > > > > > > > I've tried 13 times now to down load this Delphi*pdf
catalogue
> > > that
> > > > > > > > usually hickups right around 13megs and gets unreadable.
> Anyone
> > > > > > > > got the ECM connector numbers for a 16197427 so I can get my
> > > > > > > > S10 project finished ??
> > > > > > > > Lyndon.
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org