165 MAF computer

[Bruce]

For about a stock cammed motor, and a 305 at that, you have too much in the
way of heads and intake, injectors, IMHO

What size combustion chambers. and material are the heads?.
Bruce

From: "Programmer" <nwester at eidnet.org>
Subject: Re: 165 MAF computer
> S10 has been to 6K-- never made more than 180 grams per sec--thats
> what the guys at Harrison Performance Engineering said...torque falls
> after 4500 RPM.
> He gets great fuel economy, though <g>... says it's actually kinda scary.
> From the list of parts of what I remember:
> 305 TPI with 22 lb injectors
> CS808 SpeedPro Cam (one notch above stock)
> Full length mandrel bent headers
> Dart 2 heads (ported and flowed).
> Accel SuperRam induction
> 9.3 CR and 1.6 ratio roller rockers.
> My programming...
> Best ET has been 89 MPH at sealevel in the quarter.
> Sorry--don't have the actual time on that one.
> Lyndon.


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org