Prom problem?

[Programmer]

Or just yank the fuse--whichever is easier !! I've done the
same thing before...just had a brain fade as to the cause.

Lyndon.
----- Original Message -----
From: Bob Valentine <bob at tecmark.com>
To: <gmecm at diy-efi.org>
Sent: Tuesday, March 06, 2001 11:51 AM
Subject: Re: Prom problem?


> You're supposed to unplug the ECM every time?   (*grin*)
>
> I have a NC pushbutton switch that I've been meaning to put inline with
> power to the ECM for easy resets.
>
> -> Bob Valentine
> -> bob at tecmark.com
>
> At 12:52 AM 3/6/2001 -0700, you wrote:
> >Is he perhaps leaving the PCM plugged into the harness when doing the
chip
> >change ?
> >
> >Lyndon.
> >-----Original Message-----
> >From: Bob Valentine <bob at tecmark.com>
> >To: gmecm at diy-efi.org <gmecm at diy-efi.org>
> >Date: March 5, 2001 9:51 PM
> >Subject: Re: Prom problem?
> >
> >
> >>I've had this occasionally with my '730 (running 730 code *^),
Reseating
> >>the eprom usually fixes it.   Sometimes the idle goes wierd after a new
> >>chip, quick cycle of the power to the ECM fixes it every time.
> >>
> >>I've learned is to watch the CEL after putting in a new chip.  If it
> >>doesn't do one quick blink after power up, something's wrong.
> >>
> >>-> Bob Valentine
> >>-> bob at tecmark.com
> >>
> >>
> >>At 08:07 PM 3/5/2001 -0600, you wrote:
> >>>Well I'm having a slight problem with the 749 code in the 730.  Seems
when
> >I
> >>>swap chips the ECM wants to get a check engine light and run like total
> >>>crap.  I pull the power and EPROM and swap everything back and forth
and
> >>>after a couple times and then it works.  Anyone know a way around this?
> >>>Like something that works almost all the time.
> >>>
> >>>Dan
> >>>
>
>>>-------------------------------------------------------------------------
-
> >--
> >>>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> >>>in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >>>
> >>>
>
>>--------------------------------------------------------------------------
-
> >-
> >>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >>in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >>
> >>
> >
>
>---------------------------------------------------------------------------
-
> >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> >in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> >
> >
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org