Prog options on 96 Vette

[Len Sabatine]

    Mitch , your dealer can program the existing PCM with  a Tech2 or 
Techline Terminal
    if the folks know what they're doing. Maybe try another dealer that can 
help you.
    The replacement PCM gets overwritten with the calibration routine 
that's specific to
    your Vin Code , NOT the calibration information contained in the used 
PCM you installed.
    There IS a procedure to DO THIS at  ANY GM Dealer.
    Len

>I've got a 96 vette, and I replaced the computer control module. I drove 
>it over 100 miles before figuring out that the options needed to be 
>reprogrammed into the EPROM chip. The dealer says now he can't even 
>program the options into the car. So my AC and interior lights aren't 
>working. Something special about 100 miles on a new ECM. HELP!!!
>
>----------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org