rising rate 3bar map etc

[ECMnut at aol.com]

Yes.
The syclone 2 bar code is from a 27128 chip the 730 & 727
use 27256 chips.  When you modify the syclone bin for your app,
add the code to itself (128+128=256) then burn it into a 27256.
Terry K did this a while ago. 
I believe Grumpy has played here too (?)
You won't have wastegate solenoid control as with the 749.
Mike V

>  That works ??
>  
>  Lyndon
>  ----- Original Message -----
>  From: <ECMnut at aol.com>
>  To: <gmecm at diy-efi.org>
>  Sent: Monday, March 26, 2001 6:11 PM
>  Subject: Re: rising rate 3bar map etc
>  
>  
>  > In a message dated 3/26/01 7:44:22 PM Eastern Standard Time,
>  > nwester at eidnet.org writes:
>  >
>  > >
>  > >  Hmmm...ok...just seems it's getting harder to find '749s...next best
>  > >  would be... ??
>  >
>  > A 730or 727 running the 749 code!
>  > Mike V
>  > 
--------------------------------------------------------------------------
>  --
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org