WB update: 1V output

[Bob Wooten]

Man Barry, that sounds like the tuners dream.

BW

-----Original Message-----
From: owner-gmecm at diy-efi.org [mailto:owner-gmecm at diy-efi.org]On Behalf
Of Barry Tisdale
Sent: Thursday, March 29, 2001 9:14 PM
To: gmecm at diy-efi.org
Subject: Re: WB update: 1V output


Weeder Technologies (www.weedtech.com) sells a serial port ADC, 12 bit, 8
channel for $59.  I'm using a MAX232 board to read the ALDL (749, Syclone),
then switch to the Weeder board (software changes baud between 8192 & 9600)
via a CD4066 CMOS switch driven by two bits from the parallel port.  Works
well, allows logging all the normal ALDL data plus any other 8 inputs.
Right now, I'm logging the WB, an accelerometer and the signal from the
electric FP gauge sender.

It'd be a lot less messy if my laptop had 2 serial ports, but she's a real
cheapo model.

Barry

At 09:41 PM 3/29/01 -0500, Carl Ijames wrote:
>I just got a DI194 from www.dataq.com :  4 channels of 8 bit A/D, plus 2
>digital outs and 1 digital in,

>>..snip..<<
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org