2 bar ECM again/still (HELP)

[Bob Wooten]

I think that he meant a V8 730 memcal, or maybe I assumed that (right or
wrong).

BW

-----Original Message-----
From: owner-gmecm at diy-efi.org [mailto:owner-gmecm at diy-efi.org]On Behalf
Of sapearso at collins.rockwell.com
Sent: Thursday, March 29, 2001 10:12 PM
To: gmecm at diy-efi.org
Subject: Re: 2 bar ECM again/still (HELP)



Sorry if I missed something here, but where do you get a MEMCAL for a
V-8 '749 if they never put it in a V-8 car?

Scott
(never loans out CSH, use it too much)


------------------------------

Date: Thu, 29 Mar 2001 23:26:59 -0500
From: "Bruce Plecan" <nacelp at bright.net>
Subject: Re: 2 bar ECM again/still (HELP)

> OK, I stink I got it.

Close but not yet

> I can just plug it into the Sy/Ty memcal & play away.

No you need to use a v8 memcal.  If running a v8.

> I can edit the prom (sounds like Terry has an ECM file for My GMEPro)

Yes

> I still though don't understand why I loose the Wastegate or the TCC.
not
> tragic though, I am not running the TCC off of the ECM & there are other
> ways to do the wastegate).

Different cals move the outputs around.  The syty code uses a WG, none of
the 730s do hence the 730 doesn't have an output for doing that.
>
> I seem to recall seeing the something towards the end of the post on the
TT
> w/the Van motor, but....
>
> TANX MUCHO, I will be bothering you again later I am sure.
> BW

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org