TCC info

[Barry C. Forrest]

thanks for the info.  I must try this.

now who says Bruce is Grumpy?  

Barry f

Bruce wrote:
> 
> You've been refered to the ecm page.
> I'd just like to add, the running a scanner off of the test bench is really
> a great idea, but so is actually hooking an injector to the ecm.  After a
> while you get a knack for what things sound like, and that also can be
> handy.  ie, like when trying to run a series pararel set of TBI injectors,
> you can hear what happens, thought the scanner sees things as just peachy,
> they injectors themselves tell you all is not well
> Bruce
> 
> From: "Barry C. Forrest" <embarry at earthlink.net>
> Subject: Re: TCC info
> > rr wrote:
> > > It is a matter of going through the code and figuring
> > > out what it does. When it doesn't make sense I fire up
> > > the test bench. This lets me watch what it is doing.
> > I here all this talk about "test benches" and read code but I' just a
> > bit too new to this to get the idea.
> > I've been extracting BIN's with a pocket programmer and checking them
> > out in Turbo cat.
> > I did a few changes to my PROM on my F-body and it has been working so
> > at least I get the basic of Prog 101.
> > What's next? How do I read code and us a test bench?
> > The only test bench I have is my ride.
> > thanks
> > Barry C. Forrest
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org