EFI l4

[Sean R. Funk]

Which ECM is this? Checking the lists and I don't see anything specific to
the Quad 4. (Still out there looking, and I appreciate the assistance).


----- Original Message -----
From: <ECMnut at aol.com>
To: <gmecm at diy-efi.org>
Sent: Friday, September 14, 2001 9:52 PM
Subject: Re: EFI l4


> GM Quad-4 cars had DIS & port EFI.
> MV
>
> In a message dated 9/15/2001 12:48:39 AM Eastern Daylight Time,
> sss510 at pl510.com writes:
>
> >
> >  I have currently taken up the task of building an EFI itnake manifold
for
> > my 2.0L L Series Datsun 4 cylinder. it's kind of a hybrid muck of V6
> pistons,
> > long connecting rods, and stock block and crankshaft. Closed hcmaber
head
> > with a somewhat high CR for the street, and it seems to work well with
pump
> > gas.
> >
> >  Are there any 4 cylinders I can pull ignition stuff from? (DIS, not
dizzy)
> >
> >  Can I make a V6 brain work on a 4 cylinder? I'm after a EFI/DIS setup
> > without dropping $2000 for an aftermarket setup (I guess if it CAN'T be
> done,
> > I'll do that, but I'd rather build this from scratch with stuff from
other
> > cars to see if I can do it!). Any help is appreciated. I'm combing the
> > website and the FAQ and pulling in small bits of data, but I still have
> these
> > questions unanswered.
> >
> >  TIA!
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org