EFI l4

[ECMnut at aol.com]

GM Quad-4 cars had DIS & port EFI. 
MV

In a message dated 9/15/2001 12:48:39 AM Eastern Daylight Time, 
sss510 at pl510.com writes:

> 
>  I have currently taken up the task of building an EFI itnake manifold for 
> my 2.0L L Series Datsun 4 cylinder. it's kind of a hybrid muck of V6 
pistons, 
> long connecting rods, and stock block and crankshaft. Closed hcmaber head 
> with a somewhat high CR for the street, and it seems to work well with pump 
> gas.
>  
>  Are there any 4 cylinders I can pull ignition stuff from? (DIS, not dizzy)
>  
>  Can I make a V6 brain work on a 4 cylinder? I'm after a EFI/DIS setup 
> without dropping $2000 for an aftermarket setup (I guess if it CAN'T be 
done, 
> I'll do that, but I'd rather build this from scratch with stuff from other 
> cars to see if I can do it!). Any help is appreciated. I'm combing the 
> website and the FAQ and pulling in small bits of data, but I still have 
these 
> questions unanswered.
>  
>  TIA!
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org