EFI l4

[Chris Rogers]

if you are in australia try a holden barina setup. the later ones had dfi. 
another option is a later model daewoo ( or pontiac j2000) similar setup and GM based.

chris.
  ----- Original Message ----- 
  From: Sean R. Funk 
  To: GM EFI 
  Sent: Saturday, September 15, 2001 2:49 PM
  Subject: EFI l4


  I have currently taken up the task of building an EFI itnake manifold for my 2.0L L Series Datsun 4 cylinder. it's kind of a hybrid muck of V6 pistons, long connecting rods, and stock block and crankshaft. Closed hcmaber head with a somewhat high CR for the street, and it seems to work well with pump gas.

  Are there any 4 cylinders I can pull ignition stuff from? (DIS, not dizzy)

  Can I make a V6 brain work on a 4 cylinder? I'm after a EFI/DIS setup without dropping $2000 for an aftermarket setup (I guess if it CAN'T be done, I'll do that, but I'd rather build this from scratch with stuff from other cars to see if I can do it!). Any help is appreciated. I'm combing the website and the FAQ and pulling in small bits of data, but I still have these questions unanswered.

  TIA!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.diy-efi.org/pipermail/gmecm/attachments/20010915/565eee2d/attachment.html>