WOT open loop/closed loop

[cmillard at crutchfield.com]

Not running a WB in car yet, only on a dyno WB so far.
I plan on the DIY-WB with maybe a hardware offset device if possible (after
tonights talk.)

-Christian


-----Original Message-----
From: Bruce [mailto:nacelp at bright.net] 
Sent: Sunday, September 24, 2000 7:48 PM
To: gmecm at diy-efi.org
Subject: Re: WOT open loop/closed loop


RE: WOT open loop/closed loop
Which system are you using?
Bruce


From: cmillard at crutchfield.com
Subject: RE: WOT open loop/closed loop
Once calibrated with a wideband on a dyno and found reliable I would use it
for personal WOT tuning after major engine configuration changes, but
running a WB all the time may not be cost effective if their lifetime is
similar to a regular O2 sensor on a LT1. Just my thoughts, -Christian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.diy-efi.org/pipermail/gmecm/attachments/20010924/ac417d30/attachment.html>