Idle and the idle VE table

[cmillard at crutchfield.com]

Lyndon,  
BLMs can be "locked" by setting Min and Max BLM to 128, I'm sure there are
other ways.
I wouldn't do it regardless (I know you wouldn't), there are easier ways of
running open loop.

-Christian

-----Original Message-----
From: Programmer [mailto:nwester at eidnet.org] 
Sent: Tuesday, September 25, 2001 2:48 PM
To: gmecm at diy-efi.org
Subject: Re: Idle and the idle VE table


How'd you lock the BLM's ? I'm just guessing ,but if they're locked, the INT
is going to go sky high "trying" to move the BLM. One thing about the ECU
files--sometimes what you think you're modifying isn't the right area.  Try
modifying the ENTIRE table a couple times to check this. Just modify the
main VE table.

Lyndon.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.diy-efi.org/pipermail/gmecm/attachments/20010925/5e7659e0/attachment.html>