Idle and the idle VE table

[Programmer]

RE: Idle and the idle VE tableOk...cool. I know there's been some issues with other
ECU files made, so I wanted to be sure he knew. Thanks, Ben ! --PS--don't worry about the decel BLM's a whole lot.

Lyndon.
  ----- Original Message ----- 
  From: Ben 
  To: gmecm at diy-efi.org 
  Sent: Wednesday, September 26, 2001 7:46 AM
  Subject: Re: Idle and the idle VE table


  i made the file:)  The A1 code is pretty much set.  The code example is set for the cavalier 3.1 5 speed, which Jay has already confirmed.  A few of the vlues sections are off in the wording, like enable and disable is mixed up on some things.  The rest is good.  Im not sure if someone else is making an in depth version though.

  As for the swings in the INT, its not too bad.  I have it set back to normal now which makes the car run nicer overall.  The BLMs are close and the INT isn't that far off, except on decel which goes to 146.  Thats really the furthest I have hit so far.

  Ben
    ----- Original Message ----- 
    From: Programmer 
    To: gmecm at diy-efi.org 
    Sent: Wednesday, September 26, 2001 12:27 AM
    Subject: Re: Idle and the idle VE table


    That's right...I'm just wondering if the code swings weird when you set the mins and max that way. There IS easier
    ways to stay open loop. His big question is the Winbin "ecu" files--depending on who made the file, or how the file
    was interpreted, he may not be editing where he thinks he is.

    Lyndon
      ----- Original Message ----- 
      From: cmillard at crutchfield.com 
      To: gmecm at diy-efi.org 
      Sent: Tuesday, September 25, 2001 11:22 AM
      Subject: RE: Idle and the idle VE table


      Lyndon,  
      BLMs can be "locked" by setting Min and Max BLM to 128, I'm sure there are other ways. 
      I wouldn't do it regardless (I know you wouldn't), there are easier ways of running open loop. 

      -Christian 

      -----Original Message----- 
      From: Programmer [mailto:nwester at eidnet.org] 
      Sent: Tuesday, September 25, 2001 2:48 PM 
      To: gmecm at diy-efi.org 
      Subject: Re: Idle and the idle VE table 



      How'd you lock the BLM's ? I'm just guessing ,but if they're locked, the INT is going to go sky high "trying" to move the BLM. One thing about the ECU files--sometimes what you think you're modifying isn't the right area.  Try modifying the ENTIRE table a couple times to check this. Just modify the main VE table.

      Lyndon. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.diy-efi.org/pipermail/gmecm/attachments/20010926/0f659034/attachment.html>