[Gmecm] TPS 85 % voltage

[Tom Butcher]

Fred, I get 3.919 volts.  (4.54 - .4).85 + .4 = 3.919.  Subtract the base (0%) reading from the WOT (0%) reading, multiply by .85, then )add it back to the base.  HTH
 
Tom

"Fred Carrado Jr." <fredc at moroso.com> wrote:
Hello Again everyone,

When figuring out the 85 % voltage from the TPS woul you use the 5 volt
VCC has the referance or would you use the WOT reading from the TPS (In my
case 4.54 @WOT and .4 @ idle). So would 85% TPS be 3.40 volts or 4.25 volts?

Thank you , Fred

_______________________________________________
Gmecm mailing list
Gmecm at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/gmecm

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/gmecm/attachments/20050805/2898babe/attachment.html