[Gmecm] TPS 85 % voltage

[Fred Carrado Jr.]

Thank you, That does help.
  ----- Original Message ----- 
  From: Tom Butcher 
  To: gmecm at diy-efi.org 
  Sent: Friday, August 05, 2005 10:38 AM
  Subject: Re: [Gmecm] TPS 85 % voltage 


  Fred, I get 3.919 volts.  (4.54 - .4).85 + .4 = 3.919.  Subtract the base (0%) reading from the WOT (0%) reading, multiply by .85, then )add it back to the base.  HTH

  Tom

  "Fred Carrado Jr." <fredc at moroso.com> wrote:
    Hello Again everyone,

    When figuring out the 85 % voltage from the TPS woul you use the 5 volt
    VCC has the referance or would you use the WOT reading from the TPS (In my
    case 4.54 @WOT and .4 @ idle). So would 85% TPS be 3.40 volts or 4.25 volts?

    Thank you , Fred

    _______________________________________________
    Gmecm mailing list
    Gmecm at diy-efi.org
    http://lists.diy-efi.org/mailman/listinfo/gmecm

  __________________________________________________
  Do You Yahoo!?
  Tired of spam? Yahoo! Mail has the best spam protection around 
  http://mail.yahoo.com 



------------------------------------------------------------------------------


  _______________________________________________
  Gmecm mailing list
  Gmecm at diy-efi.org
  http://lists.diy-efi.org/mailman/listinfo/gmecm
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/gmecm/attachments/20050805/ad955bba/attachment.html