[Gmecm] best controller for a turbo 4 cylinder

[Bill Shaw]

It is all in the cal.


> From: "WopOnTour" <wopontour at hotmail.com>
> 
> Bill
> Was this one of those boxes with a "cylinder select" jumper OR is it all in
> the calibration?
>> It comes stock ready to run a 4 or 6,  or an 8 with high impedance
>> injectors.  You only need to modify it if you're going to run 8 low
>> impedance injectors.
>> Bill
> PS>The Turbo Sunbirds WERE mfi
> Regards
> WOT
> 
> ----- Original Message -----
> From: "Bill Shaw" <b.shaw at comcast.net>
> 
> 
>> It comes stock ready to run a 4 or 6,  or an 8 with high impedance
>> injectors.  You only need to modify it if you're going to run 8 low
>> impedance injectors.
>> 
>> Bill
>> 
>>> From: "WopOnTour" <wopontour at hotmail.com>
>>> 
>>> So how do you alter the 749 box to function with a 4 cylinder?
>>> ??????
>>> Regards
>>> WOT
>>> ----- Original Message -----
>>> From: "Bill Shaw" <b.shaw at comcast.net>
>>> 
>>>> 749!
>>>> 
>>>> http://mywebpages.comcast.net/p-928/749.html
>>>> 
>>>> Bill
>>>> '84 928s 5 speed Vortech/749
>>>> '81 Euro 928 5 speed - the yelow beast
>>>> '84 Ferrari Mondial Cab.
>>>> '94 Z28 A4
>>>> 
>>>> 
>>>> 
>>>>> From: Michael Kaczmar <abbynrml94 at yahoo.com>
>>>>> 
>>>>> Okay, desired specs
>>>>> port fuel injection, batch or SEFI does not matter
>>>>> 4 cylinder, VW engine
>>>>> Common controller.
>>>>> Eventually will be turbo'd once I figure out the basics.
----snip---