[Gmecm] Can't keep car in closed loop...

[Seth]

WHAT are the symptoms telling you it is changing?  MINE keeps pulsing at
idle and driving me nuts!!
 
Thanks,

Seth


  _____  

From: gmecm-bounces at diy-efi.org [mailto:gmecm-bounces at diy-efi.org] On Behalf
Of David Cooley
Sent: Friday, March 18, 2005 10:14 PM
To: gmecm at diy-efi.org
Subject: RE: [Gmecm] Can't keep car in closed loop...


what's coolant temp? also check grounds and power really well to the TPS...
if there is a lot of noise there, the ECM may think the throttle is in
motion and be dropping out of closed loop


  _____  

From: gmecm-bounces at diy-efi.org [mailto:gmecm-bounces at diy-efi.org] On Behalf
Of Sixpakmak15 at aol.com
Sent: Friday, March 18, 2005 10:05 PM
To: gmecm at diy-efi.org
Subject: [Gmecm] Can't keep car in closed loop...


Hey everyone... I was curious what you thoughts were on my situation... I
can get my car to warm up enough to get to closed loop... but It won't stay
in it for more than 3-4 seconds before switching back to open loop, then
back to closed, and so forth... It's becoming quite a pain because I can't
get a actual reading of the BLM's or the Integrator... Just wondering what
anyone thinks this might be... Thanks...

Mike 

  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/gmecm/attachments/20050319/57918f86/attachment.html