[Gmecm] Getting rid of False Knock?

[WopOnTour]

Hi Mike
My 2 cents...

1. Make sure you are using shielded wire for the KS (shieldind grounded at ECM end only)
2. Make sure you route the KS wiring as far away from spark plugs and wires as possible
3. DO NOT over-torque the sensor (this an distort the peizio device and skew it's sensitivity)
4. Do you if have the correct KS for your application? Different part numbers have different resonant frequencies to which they are sensitive to.
5. Fix the collapsed piston! lol j/k- vbg

HTH
WOT
  ----- Original Message ----- 
  From: Sixpakmak15 at aol.com 
  To: gmecm at diy-efi.org 
  Sent: Monday, March 21, 2005 2:00 PM
  Subject: [Gmecm] Getting rid of False Knock?


  Does anyone know how to fix false knock? i.e. different sensor, moving it, ect... I'm trying to tune my LT1 but it's got a rediculous amount of knock counts and it's really messing with my timming... Not sure what to do about it... Thanks for any help...

  Mike 


------------------------------------------------------------------------------


  _______________________________________________
  Gmecm mailing list
  Gmecm at diy-efi.org
  http://lists.diy-efi.org/mailman/listinfo/gmecm
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/gmecm/attachments/20050321/815edfbf/attachment.html