[Gmecm] 16141470 $5B3? $5B4? $5B5? ?????

[Scott Pearson]

If you want to send me your .bin file I'll see what it lines up with.

Scott .

----- Original Message ----- 
From: "Dustin Lof" <bubblesjrtwo at yahoo.com>
To: <gmecm at diy-efi.org>
Sent: Tuesday, October 18, 2005 11:02 PM
Subject: [Gmecm] 16141470 $5B3? $5B4? $5B5? ?????


> First like to introduce myself, I am Dustin Lof, I am
> a mechanic at a small independent repair shop in north
> central Minnesota.  From the rumors I have heard I am
> considered one of the best driveability mechanics in
> the area, I am not sure of the truth to the rumors but
> I do my best to make sure everything that comes
> through my door gets fixed and never returns.
>
> I recently converted my carburated Chevrolet pickup to
> a tbi setup, I used a 1227747 ecm and I bought an
> autoprom and am using tunepro to program a chip for
> the  way to big cam in way to little motor installed
> in said pickup.  I have some questions about the
> meanings and/or functions of some of the terms in some
> of the $42 hacs I have read but that is another story.
>
>
> The reason I am writing here is i would like to make
> some changes to the binary file in my daily driver, it
> is  a 1993 Buick LeSabre with a 3.8 and a
> 4T60E.(Because big tires + low gears + stall
> converters + big cams = big gas bill for pickup
> mentioned earlier) The PCM is a 16141470 with a
> broadcast code of BFJJ, i looked at tunercats website
> and saw that it is supported but there are three
> different binary definitions available $5B3,4,&5, I
> looked on Craig Moates website, and there is a folder
> for that PCM but it only contains one binary file.
> and nowhere did I find any hacs or ecu files.  first
> if i decide to buy tunercats license and the revelant
> definition file, which one would I need, or better yet
> how do I find out for myself which one I need?  If I
> stick with the tune pro I am using now, where can I
> find a hac or and ecu file (or several) to create my
> own definitions from?
>
> Also I have seen links to these types of files on the
> diy-efi sites but they all are dead links, or they
> wont allow me access.  Is this a problem on my end?
>
> Is there a way to search the archives on this site by
> a specific key word.  i.e. "wide band o2" without
> spending hours reading irrevelant posts?
>
> I know I ask a lot of questions, but you can never get
> any smarter if you dont. Thanks to whoever reads this.
>  Dustin Lof
>
>
>
>
> __________________________________
> Yahoo! Mail - PC Magazine Editors' Choice 2005
> http://mail.yahoo.com
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/gmecm
>