[Gmecm] Re: Fuel Economy

[gary]

I incorrectly interpreted your reply to mean by any way possible.  
You obviously implied the use of a WB as a replacement without 
any additional hardware/software to assist the PCM/ECM.

GAS

----- Original Message ----- 
From: "Mark Romans" <romans at starstream.net>
To: <gmecm at diy-efi.org>
Sent: Saturday, September 17, 2005 11:09 AM
Subject: Re: [Gmecm] Re: Fuel Economy


> Hi Darrell:  I stick with my statement as to your specific question.
> Obviously if you add an interface box you can use a wb output into 
> a narrow band input.  I have a Zeitronix Wide band and it allows me 
> to input a SIMULATED narrow band signal into the stock ecm while 
> using the WB to datalog actual afrs.
> 
> SOME people don't realize that word semantics are critical when you 
> are typing.  "Clarification" would have been a better word sincce I 
> wasn't technically wrong in the first place.
>
> ----- Original Message ----- 
> From: "Mark Romans" <romans at starstream.net>
> To: <gmecm at diy-efi.org>
> Sent: Friday, September 16, 2005 4:28 PM
> Subject: Re: [Gmecm] Re: Fuel Economy
> 
> > No No No!   You can't run a wide band in place of a narrow band.
> > The Wide band puts out a somewhat linear 0-5 v output.
> > The narrow band puts out a non-linear 0-1 v output.