[Gmecm] 1227165 vs 1227808

[John Revill]

Thanks Mark, I though that was the case. Can't get mine working. I've Tried it with the $5D program what was in my 808. It does not work. The CEL lamp keeps flickering fast and randomly. Looks like the flickering you get when receiving ALDL data. I can't get a fault code from it and it is not ALDL data. I eventually want to run the $12 program to get 8192 baud ALDL. Any clues as to where it is going wrong? Could it be a dead ECM?

John
  ----- Original Message ----- 
  From: mark krawczuk 
  To: gmecm at diy-efi.org 
  Sent: Monday, February 06, 2006 11:11 PM
  Subject: Re: [Gmecm] 1227165 vs 1227808


  hi, yes u can use the `165 in place of a `808.
  i know of a guy using one in a vn v8 commodore in place of teh  `808.
  mark k
    ----- Original Message ----- 
    From: John Revill 
    To: gmecm at diy-efi.org 
    Sent: Monday, 6 February 2006 8:46 PM
    Subject: [Gmecm] 1227165 vs 1227808


    Hi All,
      I was lead to believe that the 1227808 was just a 1227165 w/o 8192 baud ALDL and are 100% pin compatible with each other. Can anyone confirm that I should be able to use a 1227165 in place on a 1227808?

    Regards,
    John


----------------------------------------------------------------------------


    _______________________________________________
    Gmecm mailing list
    Gmecm at diy-efi.org
    http://lists.diy-efi.org/mailman/listinfo/gmecm



----------------------------------------------------------------------------


    No virus found in this incoming message.
    Checked by AVG Free Edition.
    Version: 7.1.375 / Virus Database: 267.14.25/247 - Release Date: 1/31/2006
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/gmecm/attachments/20060207/641d518d/attachment.html