[Gmecm] Re: Gmecm Digest, TBI Swap - Iron Duke Tech IV

[Robert W Hughes]

> The distributor is a giant heatsink with two coils mounted to it,
> is all... and a shaft with an o-ring on it to plug the hole where the
> mechanical dizzy went..

Just for your information, this is not a distributor, it is the DIS 
system. The "shaft" is actually the crank sensor. It should work just 
fine with a 7748 with no timing issues.
-- 
Robert W. Hughes (Bob)
BackYard Engineering
29:40.237N, 95:28.726W or perhaps 30:55.265N, 95:20.590W
Houston, Texas "The city with too much Oxygen"
rwhughe at oplink.net