[Gmecm] TBI Swap - Iron Duke Tech IV

[Dave Williams]

Tomas J. Sokorai Sch. wrote:

>>   I was thinking of cutting some notches in the crank pulley when I
>> noticed that the wire names and color codes between the DIS coil pack
>> and the distributor and coil were the same, so I wired up the
>> distributor in place of the coil pack.  It started and ran, first try.

> And runs OK at high RPM too? ... for what I read, the problem of the DIS v/s 
> dist code is the dwell calculation.

  All I've done is drive it around the back yard since I'm still sorting 
out parts of the engine swap, so I don't know that there's anything 
different about the high RPM operation.

  I thought dwell was a built-in function of the module in the distributor?