[Gmecm] TBI Swap - Iron Duke Tech IV

[Tomas J. Sokorai Sch.]

On Friday 17 February 2006 10:35, Dave Williams wrote:
>   I was thinking of cutting some notches in the crank pulley when I
> noticed that the wire names and color codes between the DIS coil pack
> and the distributor and coil were the same, so I wired up the
> distributor in place of the coil pack.  It started and ran, first try.

And runs OK at high RPM too? ... for what I read, the problem of the DIS v/s 
dist code is the dwell calculation.


-- 
Tomas J. Sokorai Sch.