[Gmecm] Comm Software

[Terminal Crazy]

Ok, following on for an ABS reader, I've looked at the data streams and
found 2 that seem, relevant.

A273 1995 F Body Lt1 Manual Trans
A286 1995 F Body ABS (Delco V1)

I see that both use pin 'M' of the ALDL connector, so I presume I can use
my TTS Datamaster Cable.

The Master I presume is the ECM which has to be put to sleep mode 8 to
allow the slave (ABS) to communicate.

What I need now is some software / source to communicate with the ABS.
What is available. Any links or other info that I would find useful 

TIA

-- 
Mitch - 1995 Z28 LT1 M6          terminal_crazy at sand-hill.freeserve.co.uk
Lancashire England          http://www.sand-hill.freeserve.co.uk/terminal_crazy/