[Gmecm] Re: converting dist and DIS

[Ryan Hess]

Right, sorry... For some reason I had 60 degrees on the brain for the  V6.  Does anybody have these specs from any I4 DIS code?  I  haven't found any DIS I4 disassemblies...
  
  Ryan
  

Robert W Hughes <rwhughe at oplink.net> wrote:  > I'm curious as to what would be a desireable minimum and maximum
> value  for a DIS V8?  Currently I have it set up to -6 deg and -86
> deg.  I wanted to ensure that I wouldn't have to deal with firing  on
> the wrong cylinder, so I made sure I didn't set it above 90 degrees,
> but this thinking must be flawed since $A1 uses -70  degrees........
> Maybe it's minimum - maximum < crank degrees  between firings?  I
> don't know, any thoughts on what would be  ideal?
> 

You might want to remember the time/distance between firing events is 90 
deg for a V8, 120 deg for a 6, and 180deg for a 4, assuming even firing 
intervals. A number of people have been using 60deg for the 6.

-- 
Robert W. Hughes (Bob)
BackYard Engineering
29:40.237N, 95:28.726W or perhaps 30:55.265N, 95:20.590W
Houston, Texas "The city with too much Oxygen"
rwhughe at oplink.net
_______________________________________________
Gmecm mailing list
Gmecm at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/gmecm


		
---------------------------------
Brings words and photos together (easily) with
 PhotoMail  - it's free and works with Yahoo! Mail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.diy-efi.org/pipermail/gmecm/attachments/20060301/a63dea34/attachment.html