[Gmecm] Heated O2 Current Draw

[Joe Vitek]

> Doing the "quick switch" will get you in the ballpark, though, and let
> you know if there will be enough current draw to hurt your ohmmeter.

Bah, live on the edge... :)

> Several inexpensive meters will go "poof" if you run more than an amp
> or so through them, even more when you get up to the 10 amp range.

It's fused, whack it!!! :D

> You're right, though, directly measuring the current would be more
> accurate - and involve less division. :)

I was thinking put it on the 10A scale right away as it will probably be more than an amp
but less than 10.

Of course, a datasheet just might be the best solution of all...

--
jo