[Gmecm] Soliciting Advice

[Ron Drew]

The Diacom software has a setting labelled "Normal Mode" (which is the 
equiivalent of open mode which Steve described); when selected the Diacom SW 
will not create the problem which you described. This is not the default 
setting, so you will have to set the mode to "normal" before connecting.
Ron

----- Original Message ----- 
From: "Steve Ravet" <Steve.Ravet at arm.com>
To: <mp at FlowersByValerie.com>; <gmecm at diy-efi.org>
Sent: Thursday, March 09, 2006 12:17 AM
Subject: RE: [Gmecm] Soliciting Advice


> When I link with Diacom, or any scanner for that matter, the
> engine goes into a mode where the spark is advanced and the
> idle is increased. Can this ecm be configured so that it
> operates the same when linked as it does when not linked?

What you want is open mode.  What you are describing is shorted mode (or
diagnostig, or some mode other than open).  This has to do with what
resistance (if any) the scan tool connects across the A and B pins of
the ALDL.  Try to find a setting like that in your scan tool.

--steve


-- IMPORTANT NOTICE: The contents of this email and any attachments are 
confidential and may also be privileged. If you are not the intended 
recipient, please notify the sender immediately and do not disclose the 
contents to any other person, use it for any purpose, or store or copy the 
information in any medium.  Thank you.

_______________________________________________
Gmecm mailing list
Gmecm at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/gmecm