[Bulk] [Gmecm] voltage regulators

[Swamp Fox]

-----Original Message-----
From: gmecm-bounces at diy-efi.org [mailto:gmecm-bounces at diy-efi.org] On Behalf
Of Jason M.
Sent: Saturday, May 13, 2006 5:56 PM
To: gmecm at diy-efi.org
Subject: Re: [Bulk] [Gmecm] voltage regulators

Just looked up the alternator online, standard 105 amp CS series alternator 
(looks like a CS121).  Voltage regulator is built in, it's the part you plug

the wiring harness into.

I work at a parts store and have seen a few times where the plug was ether 
not plugged in at all or packed full of grease from the engine bay causing a

poor connection.

Will the car start at all on the battery?  If it does your problem is with 
the cars wiring.

http://www.alternatorparts.com/cs130_sbpage1.htm  -- here are some 
instructions, page 4 has a fairly terrible picture that shows the regulator.

Okay, so from what I can see, odds are something is wrong with the wire to
the 'S' post or 'L'.
For some reason no power to field.
Time to dig.

Thanks!

I'll start picking the collectives brain for 2004 EFI wiring in a month or
so.  Just got a 63 truck with a 2004 drivetrain dropped at the shop this
week.