[Gmecm] The next step: E67 ECM

[Darren Freed]

Is it programmed already?  Have you been able to get a dump of the rom
contents?  I'd love to have a look at that code!

Darren



On 6/20/07, Mark Romans <romans at starstream.net> wrote:
>
> The msd is the MEFI controller.  Much more basic.
> Mark
> ----- Original Message -----
> From: "Clair Davis" <clair.davis at charter.net>
> To: <gmecm at diy-efi.org>
> Sent: Tuesday, June 19, 2007 8:06 PM
> Subject: Re: [Gmecm] The next step: E67 ECM
>
>
> > Is this the same basic Delphi ECM that MSD is selling now?
> > http://www.msdfuelinjection.com/mefi4.html
> > If so, that would be neat to play with just because it's so stinkin'
> > small.
> > Realistically, I'm fairly overwhelmed dealing with the 730 I have now,
> but
> > I've changed horses mid-stream in the past...  Back to Google...
> >
> > Clair
> >
> >
> > ----- Original Message -----
> > From: "Ryan Hess" <rgmecm at yahoo.com>
> > To: <gmecm at diy-efi.org>
> > Sent: Tuesday, June 19, 2007 8:33 PM
> > Subject: [Gmecm] The next step: E67 ECM
> >
> >
> >> "The E67 is the high-line controller in GM's new family of three engine
> > control modules (ECM), which will direct nearly all the engines in
> > Powertrain's line-up. It features 32-bit processing, compared to
> > conventional 16-bit processing, with 32 megabytes of flash memory, 128
> > kilobytes of RAM and a high-speed CAN bus. It synchronizes more than 100
> > functions, from spark timing to cruise control operation to traction
> > control
> > calculations, and it will work in vehicles with different generation
> > vehicle
> > wiring systems, or LANs."
> >>
> >> I just bought one to take apart and tinker with.  It's supposedly the
> >> most
> > advanced ECM in GM's lineup.  It can handle VVT phasers, DoD solenoids,
> > and
> > all kinds of extras.  There are many applications and calibrations for
> > this
> > ECM, including I4, V6 and V8.  Considering mine just cost me $60, I
> think
> > this would be a great base for a cheap aftermarket controller.
> >>
> >> Is anyone interested in working on a project like this?
> >> _______________________________________________
> >> Gmecm mailing list
> >> Gmecm at diy-efi.org
> >> Subscribe: http://lists.diy-efi.org/mailman/listinfo/gmecm
> >> Main WWW page: http://www.diy-efi.org/gmecm
> >>
> >
> >
> > _______________________________________________
> > Gmecm mailing list
> > Gmecm at diy-efi.org
> > Subscribe: http://lists.diy-efi.org/mailman/listinfo/gmecm
> > Main WWW page: http://www.diy-efi.org/gmecm
> >
>
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> Subscribe: http://lists.diy-efi.org/mailman/listinfo/gmecm
> Main WWW page: http://www.diy-efi.org/gmecm
>