[Gmecm] The next step: E67 ECM

[Mark Romans]

The msd is the MEFI controller.  Much more basic.
Mark
----- Original Message ----- 
From: "Clair Davis" <clair.davis at charter.net>
To: <gmecm at diy-efi.org>
Sent: Tuesday, June 19, 2007 8:06 PM
Subject: Re: [Gmecm] The next step: E67 ECM


> Is this the same basic Delphi ECM that MSD is selling now?
> http://www.msdfuelinjection.com/mefi4.html
> If so, that would be neat to play with just because it's so stinkin' 
> small.
> Realistically, I'm fairly overwhelmed dealing with the 730 I have now, but
> I've changed horses mid-stream in the past...  Back to Google...
>
> Clair
>
>
> ----- Original Message ----- 
> From: "Ryan Hess" <rgmecm at yahoo.com>
> To: <gmecm at diy-efi.org>
> Sent: Tuesday, June 19, 2007 8:33 PM
> Subject: [Gmecm] The next step: E67 ECM
>
>
>> "The E67 is the high-line controller in GM's new family of three engine
> control modules (ECM), which will direct nearly all the engines in
> Powertrain's line-up. It features 32-bit processing, compared to
> conventional 16-bit processing, with 32 megabytes of flash memory, 128
> kilobytes of RAM and a high-speed CAN bus. It synchronizes more than 100
> functions, from spark timing to cruise control operation to traction 
> control
> calculations, and it will work in vehicles with different generation 
> vehicle
> wiring systems, or LANs."
>>
>> I just bought one to take apart and tinker with.  It's supposedly the 
>> most
> advanced ECM in GM's lineup.  It can handle VVT phasers, DoD solenoids, 
> and
> all kinds of extras.  There are many applications and calibrations for 
> this
> ECM, including I4, V6 and V8.  Considering mine just cost me $60, I think
> this would be a great base for a cheap aftermarket controller.
>>
>> Is anyone interested in working on a project like this?
>> _______________________________________________
>> Gmecm mailing list
>> Gmecm at diy-efi.org
>> Subscribe: http://lists.diy-efi.org/mailman/listinfo/gmecm
>> Main WWW page: http://www.diy-efi.org/gmecm
>>
>
>
> _______________________________________________
> Gmecm mailing list
> Gmecm at diy-efi.org
> Subscribe: http://lists.diy-efi.org/mailman/listinfo/gmecm
> Main WWW page: http://www.diy-efi.org/gmecm
>