Engine dyno for EFI project

[kozuhia at latcs1.lat.oz.au]

> 
> 
> Another comment related to engine dynos ...
> 
> There also exist commerically available vehicle performance computers. If what
> you're looking for is a quick, simple, and relatively inexpensive means of
> evaluating the performance benefits of changes to your vehicle, this might
> be the ticket.  The device I'm familiar is a small box, about 20 cm x 10 cm
> x 5 cm, with an accelerometer, an LED display, and some electronics.  It
> could be easily mounted to a dashboard or suction-cupped to a windshield.
> It recorded 0-60 mph time, 0-100 ft time and speed, etc.  It was very
> easy to use, portable, less than $500, and when used with care (i.e. average
> several tests, run the vehicle both directions to minimize wind and elevation 
> effects) it proved helpful in evaluating supercharger changes.  I cannot
> remember the name of the device, but I have seen it sold via Ford Motorsport.
> Has anyone else used one of these things or recall the name?
> 
> 
> ---                                                                      
> Anthony Tsakiris
> 
> The opinions expressed are my own and not necessarily those of my employer.
> 

I used a Vericom machine once. That was the brand I think. costs about
500 bucks, very easy to use

hope this helps
-- 

ivan

kozuhia at latcs2.lat.oz.au