Water injection and GMs TPI

[dzorde at aesprodata.com.au]

     Unfortunately the manifold is on the car, so it'll be a bit hard to 
     see if the cold enrichment injector hole evenly feeds to all cylinders 
     (you would imagine it would).  Does anyone know where in the TPI the 
     cold enrichment injector injects into ?
     
     Dan        dzorde at aesprodata.com.au


______________________________ Reply Separator _________________________________
Subject: Re: Water injection and GMs TPI
Author:  diy_efi at coulomb.eng.ohio-state.edu at INTERNET
Date:    6/17/96 8:43 PM


> 
>      While on the subject of the GM TPI's, since I'm now using an 
>      aftermarket computer (no enrichment injector needed), would it be 
>      feasible to replumb to a water tank and use the cold enrichment 
>      injector for water injection ? 
>      
>      Dan        dzorde at aesprodata.com.au 
> 
     
Sounds reasonable, but take a look and see how well distribution 
would be from that location. I have heard that a NO2 fogger nozzle 
and a higher pressure ( >30 psi) pump gives better atomization of 
the water.
     
Frank Parker
     
93 Civic vtec custom turbo
89 S-10 L-98/superRam/DFI
>      >