June 1996 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Jun 1 02:07:24 GMT 1996
Ending: Sun Jun 30 17:54:08 GMT 1996
Messages: 330

• [admin] back on line...   John S Gwynne
• [admin] List services (automated monthly post)   John S Gwynne
• General Motors ECM   peter paul fenske
• General Motors ECM   ARTHUR OKUN
• L-Jetronic EFI for Mazda Rotary Engine   Rob Skala
• L-Jetronic EFI for Mazda Rotary Engine   Stephen Lamb
• L-Jetronic EFI for Mazda Rotary Engine   Craig Pugsley
• Re 2: General Motors ECM   peter paul fenske
• Ignition systems   SANDY
• Ignition systems   ARTHUR OKUN
• L-Jetronic EFI for Mazda Rotary Engine   Stephen Mullen
• L-Jetronic EFI for Mazda Rotary Engine   Stephen Mullen
• Rotary performance specialists.   Jake Kohl
• No Subject   dwtaylor at ptdcs2.intel.com
• L-Jetronic EFI for Mazda Rotary Engine   dzorde at aesprodata.com.au
• MAF Conversions   RABBITT_Andrew at mv8.orbeng.com.au
• MAF Conversions   peter paul fenske
• MAF Conversions   RABBITT_Andrew at mv8.orbeng.com.au
• MAF Conversions   SRavet at bangate.compaq.com
• re #3: MAF Conversions   peter paul fenske
• MAF Conversions   Jeffrey Giberstein
• MAF vs MAP   Michael Kent
• MAF Conversions   FIScot at aol.com
• MAF vs MAP   Jeffrey Giberstein
• MAF vs MAP   S. McManus
• How about no MAF or MAP?   Tony Bryant
• MAF vs MAP   RABBITT_Andrew at mv8.orbeng.com.au
• MAF vs MAP   atsakiri at ford.com
• MAF vs MAP   atsakiri at ford.com
•   Josh Karnes
• MAF vs MAP   SRavet at bangate.compaq.com
•   atsakiri at ford.com
•   Edward Hernandez R
• MAF vs MAP   atsakiri at ford.com
• MAF vs MAP   Gary W Harris
• MAF vs MAP   SRavet at bangate.compaq.com
• How about no MAF or MAP?   Josh Karnes
•   David W. Taylor
•   Frank Parker
• Forced induction/supercharger   atsakiri at ford.com
• Forced induction/supercharger, additional comment   atsakiri at ford.com
•   jfaubion
• 20 more HP   Matt Sale
• help   Miwako Okuyama
• MAF vs MAP   atsakiri at ford.com
•   Josh Karnes
•   Carter Hendricks
• Forced induction on a 2.5 Liter 4 cylinder.   David W. Taylor
• MAF vs MAP   Cal Smith
• How about no MAF or MAP?   Tony Bryant
• Forced induction on a 2.5 Liter 4 cylinder.   Doug Gubbins
• Forced induction on a 2.5 Liter 4 cylinder.   SRavet at bangate.compaq.com
• Forced induction on a 2.5 Liter 4 cylinder.   Josh Karnes
• Transient Acceleration   peter paul fenske
• Sams books on engines and controls   peter paul fenske
• Forced induction on a 2.5 Liter 4 cylinder.   Frank F Parker
• How about no MAF or MAP?   Mike Klopfer
•   Darrell Norquay
• MAF vs MAP   Darrell Norquay
• MAF vs MAP   ARTHUR OKUN
• no MAF or MAP?   peter paul fenske
• MAF vs MAP   atsakiri at ford.com
• How about no MAF or MAP?   Pete Sterrantino
• no MAF or MAP?   Land Shark
• Forced induction on a 2.5 Liter 4 cylinder   Jim Steck
• MAF vs MAP   Darrell Norquay
• no MAF or MAP?   peter paul fenske
• MAF vs MAP   RABBITT_Andrew at mv8.orbeng.com.au
• Forced induction on a 2.5 Liter 4 cylinder   atsakiri at ford.com
• MAP vs MDP   wmcgonegal at rr.etc.ncr.doe.ca
• MAF Conversions   Edward Hernandez R
• How to get more information on a BOSCH Air Flow Meter   David Hoerl
• EFI questions and answers   Todd Knighton
• [admin] ftp site back online   John S Gwynne
• Automotive article in Circuit Cellar Ink   Edward Lansinger
• Automotive article in Circuit Cellar Ink   Edward Lansinger
• Welcome aboard   Clinton L. Corbin : Backgrind/Gold : Pager 0544
• Knock sensor?   talltom
• EFI questions and answers   Fred Miranda
• EFI questions and answers   peter paul fenske
• How to get more information on a BOSCH Air Flow Meter   peter paul fenske
• Knock sensor?   Sandy
• MAP vs MDP   Darrell Norquay
• Knock sensor?   peter paul fenske
• Knock sensor?   Sandy
• EFI questions and answers   Todd Knighton
• DIY_EFI Digest V1 #161   ptimmerm at mashtun.JPL.NASA.GOV
• DIY_EFI Digest V1 #161   Todd Knighton
• EFI0000.ZIP   David Channon
• EFI questions and answers   Frank F Parker
• [admin] Improved ftp site w/archive search   John S Gwynne
• How to get more information on a BOSCH Air Flow Meter   Pete Sterrantino
• Welcome aboard   Seth Allen
• GM ECM: Vats   peter paul fenske
• Solenoid Wanted   ptimmerm at mashtun.JPL.NASA.GOV
• Solenoid Wanted   SRavet at bangate.compaq.com
• Bosch ECU Schematics   Josh Karnes
• Solenoid Wanted   Frank Parker
• Solenoid Wanted   Michael F. Sargent
• Solenoid Wanted   David W. Taylor
• Yamaha GTS1000 EFI/ nippon denso   Jerry Wills
• fuel pressure gage   William Sarkozy
• Solenoid Wanted   dzorde at aesprodata.com.au
• O2 sensor amp   peter paul fenske
• O2 sensor amp cor.   peter paul fenske
• Solenoid Wanted   atsakiri at ford.com
• Fuel prizes   Jens Knickmeyer
• Solenoid Wanted   Michael F. Sargent
• Solenoid Wanted   jfaubion
• Yamaha GTS1000 EFI/ nippon denso   Todd Knighton
• fuel pressure gage   Todd Knighton
• Solenoid Wanted   jfaubion
• Why water injection?   ptimmerm at mashtun.JPL.NASA.GOV
• EFI algorithms   peter paul fenske
• Instrumentation Information   John Brewer
• Solenoid Wanted   jfaubion
• EFI Algorithms   ducharme at orrqms2.psf.lmco.com
• Instrumentation Information   SRavet at bangate.compaq.com
• Why water injection?   Steve Ciciora
• GM ECM: Vats   George M. Dailey
• Fuel prizes   dzorde at aesprodata.com.au
• EFI Algorithms   peter paul fenske
• Why water injection?   dzorde at aesprodata.com.au
• Instrumentation Information   Frank F Parker
• Why water injection?   Tim Hoffman
• Sensor Linearization   peter paul fenske
• EFI algorithms   Jim Sturcbecher
• Fuel prizes   John Brewer
• Sensor Linearization   Frank Parker
• Design Info From BOSCH   David Hoerl
• Sensor Linearization   ARTHUR OKUN
• GM ECM: Vats   peter paul fenske
• EFI algorithms   peter paul fenske
• RPM/input capture   peter paul fenske
• Design Info From BOSCH   peter paul fenske
• Sensor Linearization   peter paul fenske
• Sensor Linearization   peter paul fenske
• page unavailable?   Andrew F. Gunnesch
• EFI algorithms   Pete Sterrantino
• EFI algorithms   peter paul fenske
• Poly Sensor Linearization   peter paul fenske
• MAF algorithm   peter paul fenske
• fuel pressure gage   Frank Mallory
• GM ECM: Vats   Gary W Harris
• Sensor Linearization   Todd Knighton
• EFI Algorithms   Todd Knighton
• Sensor Linearization   FIScot at aol.com
• GM vats   john spears
• Sensor Linearization   peter paul fenske
• Sensor Linearization   RABBITT_Andrew at mv8.orbeng.com.au
• Sensor Linearization   peter paul fenske
• Sensor Linearization   Darrell Norquay
• Linear Sensors   peter paul fenske
• efi332 unavailable?   Andrew Gunnesch
• DIY_EFI Digest V1 #165   Paul.J.Timmerman at jpl.nasa.gov
• tr7/8 help   David Ford
• tr7/8 help   SRavet at bangate.compaq.com
• tr7/8 help   Frank F Parker
• Sensor linerization   J.W. Harris
• Solenoid Wanted   Dave Williams
• tr7/8 help   Orin Harding
• tr7/8 help   David Ford
• GM ECM: Vats   George M. Dailey
• Water injection and GMs TPI   George M. Dailey
• GM manuels   peter paul fenske
• Sensor linerization   peter paul fenske
• Sensor linerization   Jim Sturcbecher
• GM ECM: Vats   Wayne Braun
• Water injection and GMs TPI   dzorde at aesprodata.com.au
• DIY_EFI Digest V1 #168   talltom
• Water injection and GMs TPI   Frank Parker
• EFI questions and answers   Edward Hernandez R
• water injection? Ford's 182k plug change   Edward Hernandez R
• Anybody build their own 5th wheel?   Daniel R Burk
• Anybody build their own 5th wheel?   Bruce Bowling
• Anybody build their own 5th wheel?   Orin Eman
• Build their own 5th wheel?   peter paul fenske
• Water injection and GMs TPI   dzorde at aesprodata.com.au
• Anybody build their own 5th wheel?   dzorde at aesprodata.com.au
• Edlebrock 3500 EFI system   Eric Elliott
• water injection? Ford's 182k plug change   ARTHUR OKUN
• Edlebrock 3500 EFI system   dzorde at aesprodata.com.au
• Anybody build their own 5th wheel?   ARTHUR OKUN
• 1/4 Wave Tuning   Donald Whisnant
• Anybody build their own 5th wheel?   Steve Powers
• Anybody build their own 5th wheel?   ptimmerm at mashtun.JPL.NASA.GOV
• 1/4 Wave Tuning   Gary W Harris
• AFR control   Eric Elliott
• AFR control   Michael F. Sargent
• 1/4 Wave Tuning   Chuck Tomlinson
• Anybody build their own 5th wheel?   Orin Eman
• Diesel EFI   Pete Sterrantino
• oxygen sensor   Zublin, Bryan (SD-MS)
• Diesel EFI   Michael F. Sargent
• Home-grown 5th wheel project   Daniel R Burk
• No Subject   mcherriman at aesprodata.com.au
• oxygen sensor   Frank F Parker
• Home-grown 5th wheel project   Lebens, Rick J
• AFR control   peter paul fenske
•   Bosch, AN, Andrew, Dr
• your mail   Frank Parker
• 1/4 Wave Tuning   Donald Whisnant
• Bosch Motronic Questions   Brad Anesi
• Home-grown 5th wheel project--wheel lacings   tom sparks
• DIY_EFI Digest V1 #171   Steve Powers
• Bosch Motronic Questions   atsakiri at ford.com
• Bosch Motronic Questions   Land Shark
• Bosch Motronic Questions -Reply   Brad Anesi
• fuel pickups & filters?   Mark Reichert
• Anybody build their own 5th wheel?   Darrell Norquay
• fuel pickups & filters?   dzorde at aesprodata.com.au
• Anybody build their own 5th wheel?   dzorde at aesprodata.com.au
• AUX. MEM. PORT   peter paul fenske
• Bosch Motronic Questions   Gregory Chan
• DIY_EFI Digest V1 #172   talltom
• Turbo and Efi relations....   David W. Taylor
• Turbo and Efi relations....   Frank Parker
• Anybody build their own 5th wheel?   SnoMo1 at aol.com
• Home-grown 5th wheel project--wheel lacings   WERNER_HAUSSMANN at HP-Loveland-om2.om.hp.com
• Bosch Motronic Questions   WERNER_HAUSSMANN at HP-Loveland-om2.om.hp.com
• Bosch Motronic Questions   WERNER_HAUSSMANN at HP-Loveland-om2.om.hp.com
• oxygen sensor   Zublin, Bryan (SD-MS)
• fuel pickups & filters?   MaxBoost at aol.com
• Fuel Injection Software   peter paul fenske
• oxygen sensor   Frank F Parker
• Bosch Motronic Questions   Bosch, AN, Andrew, Dr
• Turbo and Efi relations....   Jim Sturcbecher
• DIY_EFI Digest V1 #173   talltom
• Throttle Body source   Sam D. Cole
• Fuel Injection Software   Jim Santoro
• Latest EFI reference list part 2   SRavet at bangate.compaq.com
• Bosch Motronic Questions -Reply   Brad Anesi
• Fuel Injection Software   peter paul fenske
• Alpha-N   peter paul fenske
• Latest EFI reference list part 1   SRavet at bangate.compaq.com
• Home-grown 5th wheel project   TA Ratke
• Bosch Motronic Questions -Reply   Todd King
• "Tip in hesitation"   talltom
• buick/holden v6 ,3800   David Ford
• address change   Brian Neill Tiedemann
• bosch efi info???   Brian Neill Tiedemann
• buick/holden v6 ,3800   Craig Pugsley
• buick/holden v6 ,3800   dzorde at aesprodata.com.au
• H*LP needed understanding fuel\ignition curve dynamics   Jim Pearl
• Bosch Motronic Questions   Craig Pugsley
• Honda engine info   dzorde at aesprodata.com.au
• Honda engine info   jdennis at aesprodata.com.au
• Honda engine info   David Ford
• MicroDynamics Dynorite EFI   Michael Harris
• H*LP needed understanding fuel\ignition curve dynamics   Orin Harding
• 1/4 Wave Tuning   Edward Hernandez R
• fuel/torque/hp   Brian Neill Tiedemann
• Looking for Cadillac Error Codes   Lloyd Ferguson
• O2   Marco Cortecchia
• O2   Frank Parker
• O2   Gary W Harris
• Honda engine info   CHarris233 at aol.com
• H*LP needed understanding fuel\ignition curve dynamics   Todd Knighton
• -No Subject-   James V. Pearl/QSI
• AFR Control   William Boulton
• AC Delco ECU   William Boulton
• Honda engine info   Martin Scarr
• AC Delco ECU   Paul Beam
• 1/4 Wave Tuning   Donald Whisnant
• 280ZX ECU in '78 BMW   Josh Karnes
• fuel curves, O2 sensors   Todd King
• 280ZX ECU in '78 BMW   WERNER_HAUSSMANN at HP-Loveland-om2.om.hp.com
• AC Delco ECU   peter paul fenske
• 280ZX ECU in '78 BMW   Josh Karnes
• O2 Sensors   peter paul fenske
• OEM CONTROLLERS Intel 8051?   tom sparks
• OEM CONTROLLERS Intel 8051?   Land Shark
• 280ZX ECU in '78 BMW   WERNER_HAUSSMANN at HP-Loveland-om2.om.hp.com
• Darwin Awards   John Brewer
• 280ZX ECU in '78 BMW   Josh Karnes
• Looking for Cadillac Error Codes   ARTHUR OKUN
• OEM CONTROLLERS Intel 8051?   Stuart Woolford
• No Subject   Walter Kaufmann
•   dzorde at aesprodata.com.au
•   Walter Kaufmann
• DIY_EFI Digest V1 #180   talltom
• Bosch Motronic AFM => Point - Counterpoint   Brad Anesi
• Bosch Motronic AFM => Point - Counterpoint   Mark Reichert
•   Land Shark
• Bosch Motronic AFM => Point - Counterpoint   Land Shark
• DIY_EFI Digest V1 #180   WERNER_HAUSSMANN at HP-Loveland-om2.om.hp.com
• AC Delco ECM   peter paul fenske
• GM Coolant Temp Sensor   peter paul fenske
• Bosch Motronic AFM => Point - Counterpoint   WERNER_HAUSSMANN at HP-Loveland-om2.om.hp.com
• DIY_EFI Digest V1 #180   WERNER_HAUSSMANN at HP-Loveland-om2.om.hp.com
• Darwin Awards   John Brewer
• AC Delco ECM   Martin Scarr
• A.C. Delco Ecm   peter paul fenske
•   dzorde at aesprodata.com.au
• Bosch Motronic AFM => Point - Counterpoint   Carter Hendricks
• AC Delco ECM   FIScot at aol.com
• Bosch Motronic AFM => Point - Counterpoint   Carter Hendricks
• someone tried to reach me?   David Doddek
• GM Mass Airflow Sensor   The Fraser's
• Bosch Motronic AFM => Point - Counterpoint   RABBITT_Andrew at mv8.orbeng.com.au
• AC Delco ECM   RABBITT_Andrew at mv8.orbeng.com.au
• GM Mass Airflow Sensor   Land Shark
• Missing teeth   Dave Johnson
• AC Delco ECM   Craig Pugsley
• GM Mass Airflow Sensor   RABBITT_Andrew at mv8.orbeng.com.au
• Missing teeth   Walter Kaufmann
• AC Delco ECM   Jens Knickmeyer
• MAP system   Jim Staff
• AC Delco ECM   Alain Marchildon
• AC Delco ECM   Martin Scarr
• AC Delco ECM   Frank Parker
• AC Delco ECM   Wayne Braun
• AC Delco ECM   Peter Shoebridge
• MAP system   David M Parrish
• DIY_EFI Digest V1 #181   talltom
• Forwarded: Re: AC Delco ECM   RABBITT_Andrew at mv8.orbeng.com.au
• Problems DELCO ECM   peter paul fenske
• GM Mass Airflow Sensor   Darrell Norquay
• Corvair Efi   peter paul fenske
• 68HC11 Disassembler and AC Delco ECMs   Donald Whisnant
• Bosch Motronic AFM => Point - Counterpoint   Kenneth C. King
• 6811 Disassembler...   Donald Whisnant
• Bill Boulton Replies....   William Boulton
• DIY_EFI Digest V1 #182   The Fraser's
• AC Delco ECM   FIScot at aol.com
• Hello   Murray Hogg
• Murray- Hi   Brian Neill Tiedemann
• Disassembler --- Instruction Addition   Donald Whisnant
• Disassembler FAQ   Donald Whisnant
• Hello   peter paul fenske

Last message date: Sun Jun 30 17:54:08 GMT 1996
Archived on: Thu May 30 05:50:11 GMT 2013

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...