Electrohydraulic Camless Valves
jac at wave.sheridan.wy.us
jac at wave.sheridan.wy.us
Thu Nov 14 04:17:16 GMT 1996
determine a cylinder that has the piston part way down. open both valves. ventilate the cylinder with fresh air and a squirt of fuel. Close both valves and light it off
jac
On Wed, 13 Nov 1996 08:23:22 -0600 tom cloud wrote:
>>
>>
>>There was a thread a few months ago about electrically controlled valves.
>>
>>
>>The November 7 issue of MACHINE DESIGN magazine has an article about Ford's
>efforts in that direction. The article claims they can operate 16 valves
>with 125 watts plus some hydraulic power..
>>
>>The concept is elegant. My complements to the designers.
>>
>>With a small electric blower on the intake manifold they should be able to
>do away with the electric starter, No cam shaft or gearing is needed. The
>battery size can be reduced.
>
>How does that do away with the starter ?
>
>
>Tom Cloud <cloud at peaches.ph.utexas.edu>
>
-------------------------------------
jac at wave.sheridan.wy.us
11/13/96 21:13:55
More information about the Diy_efi
mailing list