FW: MAP

[Mark Pitts]

Didnt think it would be a problem, just need a single dimensional look =
up table for it, or for that matter, just modify the main MAP table to =
read backwards (with compensation built into the main table for non =
linearity)

Only an Idea.. dont want to start an argument, but you are right.. it =
will read both ways, so it could measure boost as well.
Mark

----------
Main problem I see here is that it will read backwards.
ie. max flow when the throttle is closed, tapering off to nothing
at WOT (and reverse under boost).=20
Is this what you are after?

Fred

>Put a tiny hole in the manifold, and connect that to one of the =
Honeywell
miniature MAF sensors, and work >out MAP by MAF through the tiny =
restriction.