Adjusting Boost

[DemonTSi at aol.com]

In a message dated 97-08-10 13:57:37 EDT, you write:

<< BTW...when you say bleed...where do you bleed the pressure to? Can the
bleed
 be dumped into the "PCV" hose? or back to the intake .. just between the
airflow
 meter and turbo? >>

Well, a bleeder valve would go into that vacuum line that runs to the
wastegate. It controls the amount of air going to the wastegate...which
limits the travel of the wastegate's spring...which would raise the boost.
The air that is "bled" off just goes nowhere. So basically, imagine putting a
simple valve onto the vacuum line...and that's pretty much what it is.

Van