Alcohol Fuel Injection/ New efi control unit.

[Auburn Performance Equipment 1-800-858-0070]

Fellow Diy'rs,

Been following the Ethanol/Methanol use thread and may have some
helpful ideas.  I'd been considering running methanol at some future 
point in my own street & strip car and have solved a few problems.

The Ethanol/Methanol lack of lubricity issue could be solved by
using a synthetic two stroke engine oil.  I've seen that motorcyle 
racers, using alcohol as fuel, use a brand called Spectro, or Klotz.
These correct synthetics say right on their lable that they readily mix
 with alcohol.  While I'm not suggesting that you pour the stuff into your tank in the 
recommended two stroke mixture ratio, you may find a small amount
added to a tankful of alcohol will aleviate the fuel pump, valve, and 
top cylinder lubricant requirement issue.

Another source for a lubricant may be the oil that radio control airplane
enthusiasts use to mix with their nitromethane fuel.  It may be 
worth investigation.

To whomever is developing an efi ecu, please let me know the details 
of the unit, I may want one to experiment with.  Is the broad done 
already?

Matt

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
AUBURN PERFORMANCE EQUIPMENT - Your Supercharging and EFI
 high performance shop!

NEW! APE CHIPS : Custom EEC-IV & V Re-Calibration Chips
            This month-The Lightning APE CHIP has arrived

Total Closeout Sale on Borla Exhaust! 

Superchargers from Powerdyne / ATI-Procharger / Vortech
1-800-858-0070  24 hr fax (508)832-9566

WEBSITE & ON-LINE CATALOG:  http://www.tiac.net/users/goape/index.htm

"If a backyard mechanic could copy it, it's the wrong kind 
of vehicle" David Vellicky, Director of NCO, Ford Product Strategy Office 
Talking about the Ford Tremor, and if they'll build it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~