Valve Train noise

[John Hess]

----------
From:  John Faubion[SMTP:jfaubion at beaches.net]
Sent:  Friday, January 17, 1997 11:08 PM
To:  diy_efi at coulomb.eng.ohio-state.edu
Subject:  Re: Valve Train noise

> cover their costs.  The original TPI was designed for the 305 engine 
> and is woefully inadequate for even a mildly built 350.  The air

Well actually it was originally designed for the 350 as used in the
Corvette. In the 1986 models it was adapted to the 305 for use in the
F-bodies. I will agree that for high RPM use it is a bit small but 
for
street use, its intended goal of building torque is just what the 
doctor
ordered!


Well, actually...check with GM.  The TPI base was originally designed 
around the flow requirements of the 305!

John Faubion
jfaubion at beaches.net